See clearly into the tax credits your development work may support.

Northline R&D helps Quebec companies that design products, processes and equipment identify the projects worth examining under SR&ED and the CRIC, then document them so their accountant can file a solid claim.

Eligibility depends on program rules and the facts of each project. No amount and no approval is promised.

Engineer working at a wiring test bench in a workshop
Workshop test bench. Photo: ThisisEngineering, Unsplash.

What is SR&ED?

Scientific Research and Experimental Development (SR&ED) is Canada's main federal incentive for R&D. It is administered by the Canada Revenue Agency and takes the form of a deduction and an investment tax credit on eligible expenditures.

The program targets work that tries to resolve a scientific or technological uncertainty through a systematic approach: hypotheses, trials, analysis of results. It exists so that Canadian companies, small and large, take the risk of developing rather than buying off the shelf.

A manufacturer refining a new process, a shop designing equipment that does not exist yet, a materials company formulating a new recipe: all may have work worth examining, even without a lab or a formal research department.

90% of SR&ED claims processed by the CRA from April 1, 2024 to March 31, 2025 were accepted as filed; 6% were accepted after modifications and 4% denied. SR&ED annual program statistics, CRA.

Why review your development work now

Federal and Quebec rules changed in 2025 and 2026. Many companies still work from the old reading.

Eligible work does not only happen in a lab

Trials on the shop floor, a prototype that failed the first time, a process parameter found by iteration: these activities, not basic research, are often the ones worth examining.

Quebec replaced its R&D credits with the CRIC

The tax credit for research, innovation and commercialization applies to taxation years beginning after March 25, 2025. It now covers salaries, a share of Quebec subcontracts, equipment and some precommercialization activities, above an exclusion threshold. For most companies, 2027 is the first real filing season. Quebec.ca, CRIC.

The federal enhanced credit was widened

The expenditure limit for the enhanced rate was raised to $6 million and capital expenditures are eligible again for property acquired on or after December 16, 2024. CRA.

The two programs are calculated together

The Quebec credit reduces the federal base, and government assistance received reduces both. Looking at them separately leads to errors in either direction.

Evidence matters as much as the project

Reviewers look for contemporaneous records: test plans, notebooks, results, timesheets. A description written after the fact, with no evidence, is the first reason claims get reduced.

Who may be eligible?

Eligibility depends on the activities actually carried out: was there a technological uncertainty that standard practice could not resolve, and was progress made through experimentation or systematic analysis? The outcome does not need to be a success.

Routine production, routine quality control, maintenance, style changes and ordinary customization of a product for a customer are not eligible.

Examples of activities that may warrant a closer look:

  • Developing or improving an industrial process
  • Engineering a new product or piece of equipment
  • Investigating a technical limit nobody at your company had crossed
  • Running experimental tests and analyzing the results
  • Developing a new material or formulation
  • Solving a technological problem with no known solution
  • Developing complex software where the program's requirements are met
  • Improving technical performance through systematic experimentation

These examples guarantee nothing. Each case is assessed under the current rules of the CRA and Revenu Québec and the facts of your projects. The initial assessment exists to find out before you invest time.

Industries we understand

Development work looks different from one sector to the next. Here is where we know how to read the projects.

Manufacturing and industrial equipment

Machine design, automation, prototype testing, production process development.

Example worth examining: a new dosing system that took three iterations to reach the target tolerance.

Energy and clean technology

Storage, electrification, energy efficiency, water treatment, residue recovery.

Example worth examining: integrating battery storage with charging infrastructure under unknown thermal constraints.

Aerospace and advanced systems

Critical parts, materials, qualification testing, embedded software.

Example worth examining: a machining process adapted to an alloy whose behaviour the shop did not know.

Electronics and instrumentation

Sensors, photonics, embedded systems, measurement devices, test benches.

Example worth examining: a sensor whose thermal drift required a new compensation architecture.

Materials and chemical technologies

Formulation, polymers, composites, coatings, process scale-up.

Example worth examining: a resin recipe reworked after durability tests missed the target.

Biotechnology and life sciences

Biological processes, preclinical testing, analytical methods, bioproduction.

Example worth examining: scaling up a fermentation whose yield dropped past a certain volume.

Software and technology development

Only when the project faces a real technological uncertainty, not a straightforward application of known practice.

Example worth examining: a real-time control algorithm whose stability was not guaranteed by the literature.

Our approach

Five steps, and at each one it is clear who does what. We prepare the technical side. Your accountant prepares the numbers and files. Your officer signs.

1

Initial discussion

Twenty minutes to understand your activities, technical projects and current situation. Nothing to prepare.

Northline R&D and you

2

Preliminary assessment

One written page: the projects that seem worth examining, the evidence that exists, what is missing, and the questions to ask your accountant.

Northline R&D; not a tax opinion

3

Technical and financial review

Interviews with your technical leads, evidence matrix, expenditure skeleton. Every sentence points to a document of yours.

Northline R&D; your CPA validates expenditures

4

Preparation and review

Project descriptions written within the agreed scope, reviewed by a qualified professional where the field or the file requires it, then approved by you.

Northline R&D, reviewer, your CPA files

5

Follow-up

Answers to technical questions in a review, deadline register, file kept for the required period.

Northline R&D with your CPA

Why work with us

No promised amount, no guaranteed approval. What we bring shows in the file.

We read technical work

A process diagram, a trial log, a measurement report: that is our raw material, not an obstacle.

Every statement has evidence

Project descriptions cite, line by line, the documents that support them. That is the first thing a reviewer asks for.

A note on what is not claimed

We also write down what we set aside and why. A careful claim defends better than an inflated one.

Your accountant stays at the centre

We work with the firm that already knows you, never in its place. The numbers and the filing stay with them.

Clear terms

Written scope, price known before we start, no auto-renewing multi-year contract.

Confidentiality and Law 25

Files and database hosted in Montreal, named access, names and salaries removed before any AI processing, a confidentiality agreement in every engagement. Where your data goes.

About

Northline R&D is a young Quebec City company founded by Yahia Ouardi, a chemical engineering student at Université Laval and candidate to the engineering profession (CPI). It starts in 2026 with a simple idea: companies that really develop deserve technical documentation that matches their work, written by someone who understands it.

We are neither an accounting firm nor a law firm, and we do not claim to be. Calculations, filing of forms and tax opinions belong to authorized professionals, with whom we work on every file.

No client results appear on this site because we have none to show yet. When we do, they will be published with the companies' permission, and not before.

Our commitments

  • No guarantee of amount, eligibility or approval, ever.
  • Preparer and fees disclosed on Form T661, as the law requires.
  • No confidential document requested before a confidentiality agreement is signed.
  • Review by a qualified professional where the file requires it.
  • Working file kept six years, then securely destroyed.

Frequently asked questions

Answers based on official CRA and Revenu Québec documents in force in November 2026. They do not replace professional advice.

What is the SR&ED program?

A federal program administered by the CRA that grants a deduction and an investment tax credit on scientific research and experimental development expenditures carried out in Canada. Canadian-controlled private corporations may receive an enhanced refundable credit on a first tranche of expenditures.

Which companies may qualify?

Any company doing work that aims to resolve a scientific or technological uncertainty through a systematic approach, whatever its sector or size. The activities count, not the company's label.

Do we need an R&D department?

No. Much eligible work happens in the shop, the plant or the field, by people who are not called researchers. You do need to show the approach and keep records.

Can manufacturing or engineering work be eligible?

Yes, when it goes beyond standard practice to solve a problem whose solution was not known. Commercial production, maintenance and routine engineering are not.

We already have an accountant. Is that a problem?

The opposite. We work with your accountant: they prepare the numbers and file; we prepare the technical documentation they often lack the time or technical background to write.

Can we review past activities?

Yes, within the filing deadline. Federally, an SR&ED claim must be filed no later than 18 months after the end of the taxation year, with no extension.

What information do you need for the initial assessment?

A conversation. We ask for no financial or technical document before a confidentiality agreement is signed. On the first call, describing what you develop is enough.

How does the assessment work?

A twenty-minute call, then one written page summarizing the projects that seem worth examining, the available evidence and the next steps. It is provided free and without commitment, and is not a tax opinion.

What is the difference between the federal and Quebec credits?

The federal credit (SR&ED) and the Quebec credit (CRIC, for taxation years beginning after March 25, 2025) have different bases and rates. The CRIC also covers equipment and some precommercialization activities, above an exclusion threshold. The Quebec credit reduces the federal base, which is why they must be calculated together.

Does a first conversation commit us to anything?

No. Nothing is sold on that call, and no document is requested.

What if our activities are not eligible?

We tell you, with the reasons, and we write down what would need to be documented differently in the future. A claim that does not hold is not worth filing.

Let's talk about your technical projects.

Start with a conversation about what you develop and the R&D credits that may apply. Twenty minutes, nothing to prepare.

Reply by email within two business days.

Do not attach confidential documents, financial statements or payroll data to this form. We will discuss them after a confidentiality agreement is signed.

Direct email: hello@northlinerd.com